Installation & Operation Manual
Ratings
Notes:
1.
Armor water heaters require special gas venting. Use
only the vent materials and methods specified in the
Armor Installation and Operation Manual.
2.
Standard Armor water heaters are equipped for
operation up to 4,500 feet with no field adjustments.
Output ratings will be reduced by 4% for each 1,000
feet above sea level up to 4,500 feet only.
3.
High altitude Armor water heaters will have a high
altitude label affixed to the unit (as shown in FIG. A)
and are equipped for operation of 4,501 feet to
12,000 feet only with no field adjustments. For high
altitude models, output ratings will be reduced by 2%
for each 1,000 feet above sea level.
High altitude models have a different control module
for altitude operation, but the operation given in this
manual for standard models remains the same.
7
Maximum allowed working pressure is located on the rating plate.
Model Number
Note: Change “N” to
“L” for L.P. gas models.
CSA
Input Modulation Btu/hr
Water Content
Gallons
Water
Connections
Gas
Connections
Vent/Air Size
(Note 2, 3)
(Note 1)
AWN150PM
30,000 - 150,000
1.3
1-1/4"
1/2"
3"
AWN199PM
40,000 - 199,999
1.7
1-1/4"
1/2"
3"
AWN285PM
57,000 - 285,000
2.4
2"
3/4"
4"
AWN399PM
80,000 - 399,999
3.4
2"
1"
4"
AWN500PM
100,000 - 500,000
4.2
2"
1"
4"
NOTICE
Figure A
High Altitude Label Location
UNIT EQUIPPED FOR
4,501 FT. TO 12,000 FT.
HIGH ALTITUDE
