LOCATING – FIND A MISLAID ITEM
LOST
Press and hold down the ON button until the Loc8tor
•
beeps and lights flash.
Press the button that your item / Tag is allocated to.
•
Loc8tor will beep and status light will flash rapidly as it’s
•
searching for the Tag.
When a Tag is detected the locating
•
lights will light up and the audio will
start.
With the Loc8tor in your hand turn
•
around slowly completing a full circle.
As you point in the right direction and
•
then move nearer to the item, the
audio pitch and frequency of beeps
will increase, and lights on the Loc8tor
change from red to amber to green.
Once a circle has been completed, face the direction of
•
the strongest audio and visual signal and walk in this
direction.
When you see three green lights the Tag is very close
•
by.
To guide you right in, the Loc8tor now changes to
•
‘zooming in’ mode (pictured). As you get closer
amber then red lights illuminate and the audio pitch
increases.
FOUND
7
To stop a search press ON/OFF button or the locate
button your Tag is allocated to.
