���
®
OPERATING INSTRUCTIONS & REMOTE CONTROLS
Triple Oscillation Setup (Available with elite two and elite three only)
Triple oscillation features random shots across the width and depth of the singles court.
• Turn the machine power on.
• Set the speed to 60 mph and feed rate at 8 seconds.
• Turn the vertical oscillation on.
• Watch the elevation indicator and turn the vertical oscillation off at its
lowest point.
• Adjust the elevation until the balls are just going over the net. If any balls
hit the net, adjust the elevation up. If any balls shoot past the baseline,
adjust the elevation down.
• Turn on the vertical oscillation for deep/short shots.
• Turn on the horizontal oscillation for random left/right.
• Maintain the speed at 60 mph for optimum results.
Elite Remote Control (Optional)
• Power on your machine by pressing the POWER switch on
the control panel.
• Press the REMOTE switch located on the control panel to ON
to activate the remote.
• Turn the BALL FEED dial to select a 2-10 second feed rate.
• From the opposite side of the court, press the buttons on the
handheld remote to turn on/off the feed and/or sweep.
elite10 Remote Control
(Optional, for elite two and elite three only)
• Power on your machine by pressing the POWER switch on
the control panel.
• Press the REMOTE switch located on the control panel to
ON to activate the remote.
• Turn the BALL FEED dial to select a 2-10 second feed rate.
• From the opposite side of the court, press the black FEED
on/off button on the handheld elite10 remote to begin play.
REMINDER
:
Please be advised that the switches and dials
on the control panel will always override the remote control.
Feed Sweep
