���
®
CONTROL PANEL
A
.
Power Switch
– Powers the machine on and off.
B
.
Elevation
– Adjusts the ball the ball trajectory up and down.
C
.
Vertical Switch
– Turns on and off the random vertical oscillation.
(Available on elite two and elite three machines only.)
D
.
Horizontal Switch
– Turns on and off the random horizontal oscillation.
E
.
Two-line Switch
– Turns on the 2-line function for narrow and wide options.
(Available on elite three only.)
F
.
Remote Switch
– Activates the remote control handheld keyfob. If you did not
purchase a remote, this switch is not active until you upgrade your machine.
An upgrade is available from your dealer or direct from the factory.
G
.
Reset Button
– The reset button pops out in the event of a malfunction. If the
reset button pops out, please refer to the Troubleshooting section on page 6.
H
.
Basic Charger Jack
– This jack is for the basic charger.
I
.
Feed On LED
– LED will light up when the feed motor begins to turn.
J
.
Feed Knob
– Adjusts feed interval between 2-12 seconds. Turn completely
counter-clockwise to turn off the feed.
K
.
Speed Knob
– Adjust the speed from 10-80 mph.
L
.
Spin Knob
– Controls amount of spin on the ball.
M
.
Battery Status Indicator
– LED indicates battery charge.
Pat. #D456,866
Pat. #7,445,003
A
B
C
D
E
F
G
H
I
J
K
L
M
