쐋
MACHINE SETUP
Intended Use
This pickleball machine is intended for use on a pickleball court. For safety reasons,
players should stand on the opposite side of the net at a minimum of 22 feet away
from the machine. This ball machine is designed to throw
pickleballs only
.
Unpack and Keep Shipping Box
Remove the machine from the box. Keep the shipping box along with the custom
packing materials in case the machine needs to be shipped back to the factory.
Assemble Machine
• Raise the metal handle by lifting up until a click is heard.
• Detach the hopper by lifting it up off the red base.
• Flip the hopper and reattach by pushing the hopper on to the red base knobs,
starting with the front knob (side furthest from handle), then push down to
attach the hopper to the back knob.
•
Do not remove the wire deflectors.
Handle Operation
To raise the handle, simply lift up on the handle until you hear the lock buttons click
into place. To fold the handle down, stand behind the machine and place hands on
each of the plastic handle hinges. Simultaneously press up on the hinge lock buttons
and gently push the top section of the handle forward over your machine.
The handle is provided to push or pull the machine. The machine is not designed to be
pulled up and down stairs. If the handle is damaged or breaks in this manner, please
be advised it is not covered under the warranty. Avoid rough or uneven surfaces that
may bend or damage the underside of the machine.
Transporting the Machine
To prepare the machine for transport in your vehicle, invert the hopper to cover the
machine and fold the handle. The machine weighs approximately 30-42 pounds
depending on the model purchased and may be lifted into a vehicle by one or two
people. Use the molded handholds on the underside of the machine to lift and carry
the machine.
