TS – My Remote Control Is Not Working
Author: CT
Contributors: JR,JJ,RR
Orig. date: 9/16/10
Revised: 5/28/2015
comes on
before you screw the keyfob back
on.
If the LED light on the transmitter does not illuminate after a
replacement battery has been installed then the transmitter is
faulty and a replacement is needed. If the transmitter is broken
inside or is “rattling” then a replacement is needed.
E578 Transmitter (Key Fob)
If the issue is not resolved then G
o to Step 2.
Step 2 – Checking Interference and Reception
1.
Remove the control panel and look at the wires leading
to the Remote Receiver. There should be a single thin
black wire with no clip or attachment at the end, this is
the antenna.
The antenna should be “hanging” down loosely in the
machine to maximize reception from the transmitter.
If the issue is not resolved then
Go to Step 3
.
Control Panel - Open
Remote Receiver Installed
