LP950 OPERATORS MANUAL
5
Paper
When the paper roll in the printer runs out, this indicator will flash on and
off. The 'READY' and 'ON LINE' indicators will go off. When the paper roll
is replaced, the 'PAPER' light will go out, but the ON LINE button must be
pressed to put the printer back 'ON LINE'.
Paper Roll Replacement
IMPORTANT
Do not pull the paper roll backwards through the printer
mechanism as this will cause irrepairable damage!
The
LP950
printer uses standard 57mm wide paper; either plain or 2-layer
NCR - if a duplicate copy is required.
The maximum roll diameter in either case is 57mm.
To replace the paper roll -
1. Open the hinged lid by springing the plastic clip and lift the lid wide open.
2. Remove the short length of paper remaining in the printing mechanism
by:
i) Using the PAPER FEED button, or
ii) Using the manual paper feed wheel, or
iii) Gently pulling the paper through the mechanism by hand, in the
NORMAL direction.
3. Remove the old roll core from the holding fingers and insert the new roll
with the paper direction as shown in the diagram.
PAPER LOADING PATH
FEED THROUGH
APPROX 6mm
RIBBON
CASSETTE
