LNS QUICK LOAD SERVO S3 T BARFEED, Service Manual, Page: 15 / 152

PROCEDURES
SERVICE MANUAL – QL Servo S3-T
8. After anchoring the unit, recheck the level and the alignment of the unit.
9. After the alignment has been rechecked, power and air will need to be hooked up to the bar
feeder.
10. Once the power and air have been hooked up, the bar feed must be calibrated.
After calibrating the bar feed, return to this procedure and move on to Step 11 for the final
alignment.
11. For final alignment, load a bar into the v-channel and verify that it can be loaded into the spindle of
the lathe without hitting the sides of the spindle or spindle liner.
If the bar hits side to side the alignment will have to be adjusted.