20
Operation
Fireplace Owner’s Manual
LTR50001006, Rev. E
www.calflamebbq.com
and replace any part of the control system and any gas control
which has been under water.
Make sure the ignitor battery has been installed properly. Ignitor
•
will not operate properly without a battery installed.
Lighting Instructions for Automatic Starter
Remove protective storage cover and locate the manual gas con-
1.
trol valve and igniter button on the fi replace.
Make sure fuel supply is properly connected and turned on at the
2.
source.
Depress igniter button until you hear it sparking. You will hear a
3.
small popping noise. Keep igniter button pushed in while slowly
turning the fuel fl ow valve to the full fl ow position at the fi replace.
The fi replace should light within 5 seconds. If you do not hear the
igniter sparking you may need to replace the battery. The starter
uses one standard AAA battery, located directly behind the rubber
push button knob. (Unscrew knob to access battery.) Note some
models ship with the batteries removed or may not be included
with your model.
If a fl ame does not start within 10 seconds, shut off all gas supply
4.
and wait fi ve minutes to allow all gas fumes to clear. Re-try or go
to trouble-shooting and start again from step 1.
To Turn Off Gas
Turn the ON/OFF valve to the off position at the unit for natural gas
unit. For propane unit, turn the ON/OFF valve to the OFF position at
