Keypad 2 Manual 1.0
Using the Pairing Button
1) If you have used the keypad with another Macintosh™ computer or MacBook, you
have to set up the keypad again. Follow steps 1 ~ 7 above.
Power Management
To save power, it is highly recommended to power off the keypad
while the keypad won’t be used for a long time or carrying with
Macbook;
The LMP Keypad has a power safe mode. Once you turn
off your Macintosh™ the LMP Keypad will go to sleep in order to save
battery power. To wake it up, press any key on the LMP Keypad.
1) To power off the LMP keypad, move the power lever to the “Off” position. You
should see the message “lost connection” on you screen.
2) To power on the keypad again, move the power lever to the “On” position and LED
indicator will flash 3 times in green. You may see the message “connected” on your
screen or in the Bluetooth assistant. You can use the keypad again.
3) The LMP keypad greatly reduces the power consumption automatically when it is
in idle mode (connected, but no keying). In fact, the power consumption in idle
mode is only about 1/30 (about 0.1mA) of the consumption of the keying mode
(typing on the LMP keypad; about 3mA). This feature greatly extends the battery
life.
4) The LMP keypad displays a low-battery warning by flashing LED in the interval of
1 second on (green) and 1.5 seconds off (no LED). You should charge your keypad
now to avoid any sudden loss of connection.
5) To charge your built-in rechargeable battery, turn off the LMP keypad, connect
micro USB jack of charging cable to micro USB port on LMP keypad and USB jack to
Macintosh™ computer or MacBook. The LED indicator will On in blue. If you do not
get a new connection you may have to re-pair the LMP keypad. Follow steps 1 ~ 7
above.
The pairing time of LMP Keypad with your Macintosh™ computer
normally just takes a few seconds. However, it may take up to 40
seconds with some Bluetooth™ dongles.
Connecting with the Apple™ Magic keyboard (A1644)
1)
Connect the connection bar to the LMP Keypad on its left side by simply
sliding it into the opening. It will nicely form a Keypad unit ready to be
linked to the Apple™ Magic keyboard.
2)
Connect the Keypad unit to your Apple™ Magic keyboard (A1644) by
sliding the right side into the LMP Keypad unit as shown in figure below.
You now have a full-size Bluetooth™ wireless keyboard ready for use!
Make sure the Apple™ Magic keyboard is firmly plugged into
the LMP Keypad unit.
