32
Care and Maintenance
2.3.4 Bring the fuel knob to "close" position.
Start the engine to exhaust petrol in the
carburettor as well as in the fuel line.
The engine will stop automatically when
the fuel is exhausted.
2.3.5 Remove the spare wheel as explained
on page 31.
2.3.6 Lay the scooter gently on ground on its
right hand side with the handle bar
sleeve touching the ground at right an-
gle.
2.3.7 Bring the vehicle in first gear and hold
the wheel with one hand. Remove the
five nuts securing the wheel to the brake
drum by using the box spanner (Fig. 38).
2.3.8 Remove the spring washers and take
out the wheel from the brake drum.
2.3.9 For refitting, follow the above procedure
in reverse order.
Precaution:
1.
Tighten all wheel securing nuts alternately and
progressively. Re-check if all nuts are tightened
properly.
2.
Get the tyre pressure checked to the recom-
mended level at the nearest service station.
Fig. 37
Fig. 38
