background image

Control  Functions

Control  Functions

INSTRUMENT  PANEL

An elegantly designed instrument panel which
contains the following:

1.

Fuel-Gauge

2.

Fuel level indicator needle

3.

Head light low beam indicator

4.

LH turn signal indicator

5.

Speed indicator needle

6.

Odometer

7.

RH Turn signal indicator

8.

Head light high beam indicator.

1.2

Glove compartment lock  :

  To   open

the lock, insert the key into the   lock
and rotate anti-clockwise till the end
and  then  press the lock downwards.
For closing, press the lid, turn   the key
clockwise and then take out the key
(Fig. 16 & 17).

1.3

Seat Lock (Dual Seat) :

 Insert the key,

rotate it clockwise till the end then take
it out.
Push the lock with thumb (fig. 18) and
lift the saddle from the back (fig. 19).
Place the saddle in its normal position
& press it down.
To lock the saddle, follow the above
procedure in reverse order.

1.4

Utility Box Lock :

 To open the utility box

insert the key and rotate it clockwise till
end (Fig. 20). Open the lid (Fig. 21).

For closing, close the lid and rotate the
key anti-clockwise to lock and then take
out the key.

2 1

2 2

Summary of Contents for Speedy 4-Stroke



























Reviews: