75
Type
Profile (0), Vision (1), or Tracheid (2).
X0
Start of section along the x-axis (length), in system
coordinates (mils).
X1
End of section along the x-axis (length), in system
coordinates (mils). Should be greater than X0.
Channel
Numeric identifier of the TCP output channel to which
this section will be routed. See the FireSync Host
Protocol User’s Manual for details on enabling/disabling
data channels.
Sensor-level settings include the following entries:
Setting
Description
Name
A numeric index that defines the order of a sensor
within its group.
SerialNumber
The manufacturing serial number of the sensor, which
can be seen on the sensor housing.
Enabled
Enables or disables the sensor.
XCentre
Defines the mounting location of the sensor, in system
coordinates (mils). [
Note:
this setting has no effect
unless the Setup/UseXCentres setting is also enabled.]
Obstructions
Obstructed zones, described below.
If there are any objects that regularly appear within the field of view of the sensors, such
as chain runners, the zones in which those objects appear must be identified before the
system will operate correctly in
Calibration
,
Web
, or
Detection
modes. Accordingly, each
sensor has a list of
obstructions
, where each obstruction defines a zone that will be
ignored by the system.
Setting
Description
X0
Start of obstruction zone along the x-axis (length), in
sensor coordinates (mils).
X1
End of obstruction zone along the x-axis (length), in
sensor coordinates (mils).
Z0
Start of obstruction zone along the z-axis (height), in
sensor coordinates (mils).
Z1
End of obstruction zone along the z-axis (length), in
sensor coordinates (mils).
7.3.2
Calibration Target
A description of the calibration target can optionally be stored in a file named
“CalibrationTarget.xml” on each FireSync Station and can be accessed or modified using
the FireSync Host Protocol
Read File
and
Write File
commands. The following example
illustrates the format of the "CalibrationTarget.xml" file:
<?Xml version="1.0" ?>
<CalibrationTarget schemaVersion="1">
<Width>4000</Width>
<Height>2000</Height>
Summary of Contents for chroma+scan 3155
