LMI Technologies Gocator 2100 Series User Manual Download Page 294

Page: 294 / 523

Gocator Line Profile Sensors - User Manual

Gocator Device Files • Job Files • 294

SurfaceRegion2d

An element of type SurfaceRegion2d defines a rectangular area of interest on the X-Y plane.

Element

Type

Description

64f

Setting for surface region X position (mm).

64f

Setting for surface region Y position (mm).

Width

64f

Setting for region width (mm).

Length

64f

Setting for region length (mm).

SurfaceRegion2d Child Elements

ProfileArea

A ProfileArea element defines settings for a profile area tool and one or more of its measurements.

Element

Type

Description

Name

String

Tool name.

Source

32s

Profile source.

Anchor\X

String (CSV)

The X measurements (IDs) used for anchoring.

Anchor\X.options

String (CSV)

The X measurements (IDs) available for anchoring.

Anchor\Z

String (CSV)

The Z measurements (IDs) used for anchoring.

Anchor\Z.options

String (CSV)

The Z measurements (IDs) available for anchoring.

StreamOptions

Collection

A collection of

StreamOption

on page 291 elements.

Stream\Step

32s

The stream source step. Possible values are:

1 – Video

2 – Range

3 – Surface

4 – Section

Stream\Id

32u

The stream source ID.

Type

Boolean

Area to measure:

0 – Object (convex shape above the baseline)

1 – Clearance (concave shape below the baseline)

Type.used

Boolean

Whether or not field is used.

Baseline

Boolean

Baseline type:

0 – X-axis

1 – Line

Baseline.used

Boolean

Whether or not field is used.

RegionEnabled

Boolean

If enabled, the defined region is used for measurements.
Otherwise, the full active area is used.

Region

ProfileRegion2d

Measurement region.

ProfileArea Child Elements

Summary of Contents for Gocator 2100 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands

LMI Technologies Gocator 2100 Series, User Manual

Search results

Summary of Contents for Gocator 2100 Series

Reviews:

Related manuals for Gocator 2100 Series

Brands by name

Popular brands