MIUM0018_REV05_ HRH&HRS
_20170206-MIUM-
4.4 Installation of roof cover (T
•
In the event that roof covers a
CCS/CDX, it is always possible
•
For external sections CCS/CD
coupling unit and section acco
element placed on the coupling
•
For mounting roof cover eleme
further, on vertical unit, the upp
•
As first, place the intermediate
with the special rubber washers
•
The jointing side of each end s
by an about 45° rotation, then p
•
Complete the installation by sea
A
A
-ENG
(TPR-H, TPR-V, TPR-CH, TPR-CV)
are supplied apart to be mounted later than the unit a
le to install them on the existing unit/sections.
DX, both horizontal and vertical version, it is supplied
cording to the instructions of next 4.5, shall be interc
ng side (
fig. 9a
).
ments, preventively unscrew the M6 screws by a 5 mm
pper bracket (
B
) shall be removed.
te roof cover plate, fix it by screwing the same M6 scr
rs supplied together with the roof covers.
side roof plates shall be first hooked to the intermediat
placed upon the upper panels and finally fixed by M6 sc
ealing the connection lines between element and eleme
CCS/C
CCS/CDX
HRH / HRS
HRH / HRS
Fig. 9b
B
A
A
14
ENG
t and/or its external sections
d a roof cover which, before
rchanged with the unit roof
m Allen key (
A in fig. 9b
);
crews, preventively provided
iate plate vertical protrusions
screws with rubber washer.
ent.
Fig. 9a
S/CDX
