5
Using the
ColdSore
Clear
Advance
1. Remove the protective cover and press and hold the ON/OFF button for 2 seconds to
turn the unit on. The unit will emit a beep while in use, signifying that the device is
working properly.
2. Gently place the illumination area on to the cold sore (for the most effective results, the
illumination area must touch the cold sore at all times). Keep the illumination area in
place until the 1 minute treatment cycle has ended.
3. When the battery power is low, a continuous beeping sound will be heard to indicate
that the batteries should be replaced.
4. Once the treatment cycle has ended, the unit will automatically switch off. Clean the
illumination area with an alcohol wipe and replace the protective cover. Do not immerse
the unit in water.
THE ILLUMINATION AREA SHOULD BE CLEANED CORRECTLY BEFORE AND AFTER USE
