25
26
• Do not immerse the TENS Digital Pain Reliever in water or any liquid. Do not drop
the TENS Digital Pain Reliever or throw it from a height
• After using the TENS Digital Pain Reliever, please remove the output plug from the
output socket and re-attach the gel pads to the protective transparent film
• Always use the protective film when the gel pads are not in use
• Do not twist or pull the output cables
• Do not use any chemical to clean the main TENS Digital Pain Reliever or the gel pads.
In case you need to clean them, please wipe with a damp, lint free cloth
• Do not let the gel pads dry out or expose them to direct sunlight
• Keep the gel pads clean
Troubleshooting
Problem
Check points
Possible solution
Stimulation stops
during therapy
Have the gel pads come off the
skin?
Turn off the TENS Digital Pain
Reliever and stick the gel pads
firmly to the skin.
Is the output cable disconnected?
Turn off the TENS Digital Pain
Reliever and re-connect the cable.
Have the batteries been exhausted? Please replace them with new
batteries.
Are the gel pads dirty?
Please clean the gel pads using a
damp, lint free cloth.
Is the surface of the gel pads
scratched?
Replace with new gel pads.
Maintenance and Cautions
The skin becomes red
and/or you feel a
stabbing pain.
Are you wearing the gel pads on
the same site every time?
Re-position the gel pads. If at any
time you feel pain or discomfort
stop use immediately.
