Lloyd LT48N, User Manual

Page: 7 / 25

4
In order to guarantee an even diffusion of the air in the room, you can choose one way as
follows to control:
1.By pressing the button of swing you can control to move the louver alternatively from
up to down and adjust the air flow direction. The louver direction can be set as to the
sequence while you press the button each time.
Up-down-left-right Direction
Lock louver Left-right Direction Lock louver
Up-down direction Lock louver.
2.You can adjust the louver direction to desired direction by pressing the
or swing button on remote controller.
Please see the remote controller buttons for function al introduced.
→ → → →
→
“ ”
“ ”
Left/Right wind
description
Other operations
NOTE : Adjusting the vertical louvers manually in automatically-controlled operation
may damage the servo-motor.
Fig. A Fig. B
Items of attention
Please read this instruction before using the air conditioner, you are strict to operate
according to the instruction. Otherwise, it may be damage to the air conditioner or to the other
person's safety and property.
carefully
Checking Before usage
★
See
“
air conditioner remote controller instruction
”
.
Remote controller usage
Wind direction adjustment
Set the suitable temperature for a comfortable environment. Don't make the room too cold
or too hot.
During the cooling operation, don't let the sunray into the room, please pull down the window
shades or veils.
Close the windows and doors. Otherwise, it decreases its cooling or heating capacity.
Optimal operation
Pay attention to the following items so as to ensure optimal operation of the system, detailed
operation see the relevant content.
Please set the scheduled operation time with the remote controller.
Make sure that air outlet and inlet are not blocked, or it may decrease the efficiency of the
air-conditioner,even stops the operation of the system.
If the air filter is blocked, the cooling or heating capacity will be affected.Please regularly
clean the air filter.
1.Make sure that the earth wire is connected safely and reliably.
2.Make sure the filter net is properly fixed.
3.
Make sure that air outlet and inlet are not blocked.
4. Please clean the filter before starting the air-conditioner referring to page to 6
“
Cleaning
”
for how to operate.
5.Check to see whether the outdoor install bracket is damage. if yes, please contact our
Service center locally.
When you electrified the A/C at the first time. The screen display full screen, the guide baffles
go to the place. Then the deflecting damper will auto-dose. In all process, Please do not more the
corner vane aud deflecting damper by hand.
★
- 4 -