6
1. Connect the Aux out jacks from the external
audio player (such like DVD player, TV, VCR
…etc.) to the AUX IN jacks on the rear of
Sound Bar by the supplied RCA connection
cable as the figure below:
2. Connect the Sound Bar to the power as
previous procedures. The Standby indicator will turn on.
3. Press the STANDBY button on the Sound Bar or Remote Control to power on
the Sound Bar.
4. Press the SOURCE button on the unit repeatedly or press the AUX button on
the Remote Control to turn to AUX mode. The AUX indicator will turn on.
5. Power on the connected external player and start playback as usual.
6. Press the volume buttons to adjust volume level.
7. Press the TREBLE buttons on the Remote Control to adjust treble as desired.
8. Press the BASS buttons on the Remote Control to adjust bass as desired.
9. Press the EQ preset mode buttons MUSIC; MOVIE or VOICE to turn on the
preset EQ effect as desired.
10. Press the MUTE button to turn off the sound, press again to resume.
11. When finished listening, press STANDBY button on the Speaker or Remote
Control to power Off (Standby mode) the Speaker.
1. Connect the Headphone/Earphone; Line out jack
from the external audio player (such like MP3 player;
Discman … etc) to the LINE IN jack on the unit by the
supplied LINE in connection cable as the figure on
right.:
2. Press the STANDBY button on the unit or Remote
Control to power on the unit.The green indicator will
turn on.
Note: If the unit is in BT (Blue Tooth) mode, the blue
indicator will light. Press the LINE button on
the Remote Control to switch to LINE in mode.
3. Power on the connected external player and start
playback as usual.
4. Press the volume buttons to adjust volume level.
5. Press the MUTE button to turn off the sound, press again to resume.
6. When finished listening, press STANDBY button on the unit or Remote Control
to power Off (Standby mode) the unit.
NOTE: To saving electric power, unplug the AC/DC Adaptor from wall outlet if long
periodof time will not use.