5
PUSH
OPEN
CR2025
PUSH
OPEN
Lit
hium
Cell
CR2025
3V
SC
UL
Lithium Cell
CR2025
3V
SC UL
1. Push the tab, then slide out the battery tray as the figure
on the right.
2. Replace the old button cell by a new CR 2025
button cell as the polarity markings on the remote control.
3. Close the battery tray.
To replace the button cell:
BATTERY PRECAUTIONS:
Follow the size and type of battery specified.
1. Use only the size and type of battery specified.
2. Be sure the follow the correct polarity when installing the battery as indicated in the battery
compartment. A reversed battery may cause damage to the device.
3. If the battery in the device is consumed or the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from possible battery leakage.
4. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.
5. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
6. Clean the battery contacts and also those of the device prior the battery installation.
7. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zine) or old batteries with
fresh ones.
NOTES:
1. When there is an obstacle between the unit and the
transmitter, the transmitter may not operate.
2. When direct sunlight, an incandescent lamp, fluorescent
lamp or any other strong light shines on the REMOTE SENSOR
of the unit, the remote operation may be unstable.
- Insert the small plug from the supplied
AC adapter to the DC IN Jack on
the unit.
- Insert the AC adaptor to wall outlet
having AC 100-240V~ AC, 50/60 Hz.
AC/DC adapter