13
33.C.159.1409
Quick Guides | ICS.2
Back to start
When the channels for the thermostat has
been chosen this is confirmed by pressing the
SET button of the thermostat. The display will
then show SYNC while synchronizing with the
receiver unit (this might take a while).
If this process takes an unreasonable long time
the synchronizing can be restarted by pressing
SET once more.
When the synchronizing process is done
the display will show the standard mode
showing temperature and other miscellaneous
information. This confirms that the setup is
completed for this thermostat.
Repeat the steps for each thermostat that is to
be connected to this receiver unit.
4.5
