7
No Parameters and Functions
10
bEd:
(+) or (-) to set the desired temperature for
in pro-
grams P1-P9
11
Out:
(+) or (-) to set the desired temperature for
in pro-
grams P1-P9
12
InP:
(+) or (-) to set the desired temperature for
during re-
mote operation .
Diagnostic function:
The frame around the symbol shows
closed contact.
20
deG:
Temperature units - °C Celsius or °F Fahrenheit
21
Time format
24H (24:00) or 12H (12:00 AM/PM)
22
dSt:
Summer time change.
YES
automatic change.
no
man-
ual change of time. Date is not used.
30
AirC:
Calibration of the room temperature display ±5°C/±8.5°F.
The calibration should be done after 1 day’s operating with the
same set temperature. Place a thermo-meter close to the control-
ler and check the temperature in the room after 1 hour. When
you enter the calibration parameter,
no
is displayed to indicate
that no calibration has been made. To enter the value shown on
the thermo-meter, use (+) and (-) keys to enter the real value.
Then press
OK
to confi rm. The message
YES
is displayed and
the value will be stored in the internal memory. You can cancel
the calibration by pressing
OK
and then
.
31
OutC:
Calibration of outdoor temperature sensor ±10°C/±17°F.
The same calibration procedure described for 30 AirC, except
for the location of the thermometer.
40
LANG Fr/EN:
Change of language. Use (+) or (–) keys to se-
lect French or English.
80
Clr ALL:
Resetting to factory settings.
Note: Ensure that you have all necessary information to reset
your installation before using this function.
Press and hold the
OK
key for 10 seconds to reset tempera-tures
and parameters in this menu to factory settings. User programs
will also be reset.
90
Software version
99
End
: Press the
OK
key to exit parameter menu and return to
normal operation.
Reservations for product improvements.
GB
ENGLISH
