User Manual for COLOSSUS Series Embedded Net DVR
LJD Digital Security Ltd
Page
51
of
107
Copyright © 2005. All rights reserved.
Camera Name
In “Image Setup” menu, you can define name for each camera.
Please note that camera’s
name can not be copied.
The steps of camera name setup:
Step 1:
Select one camera.
Step 2:
Move “Active Frame” to camera name edit box, press
【
EDIT
】
key to enter into edit
status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4).
The camera name can support 32 characters.
Step 3:
Press
【
ENTER
】
key to exit edit status.
Move “Active Frame” to “Confirm” button, press
【
ENTER
】
to save the modification and you
can see the new camera name. Press “Cancel” button or
【
ESC
】
key to abort.
Setup Camera Name Position
If you do not want to display camera name, just disable the check box beside camer name
edit box. The disable flag is “
×
”. If you enable the check box, you can setup the camera name
position. You can copy the position to any other camera. The setup stpes are:
Step 1:
Enter into “Image Setup” menu.
Step 2:
Select one camera.
