LIW Baffin MODI BUGGY User Manual Download Page 6

Page: 6 / 35

Modi Buggy™

Edition 7

p. 5

In these instructions for LIW Care Technology Sp. z o. o. products, you will find

information

marked with

the "

NOTE!

symbol. It is used to the draw

the

reader’s particular attention

to the text. It looks

as follows:

NOTE!

THE SYMBOL IS USED TO DRAW THE READER’S ATTENTION TO THE TEXT

WHICH IS MARKED WITH THIS SYMBOL. FAILURE TO COMPLY WITH THE
INSTRUCTIONS MAY

ENDANGER THE HEALTH AND SAFETY OF THE USER OR IT MAY

DAMAGE THE PRODUCT.

3. Indications for product use

Modi Buggy

medical device

is designed for children suffering

from

paralysi

s, diplegia,

triplegia,

tetraplegia

hemiplegia or hemiparesis.

It is recommended for children who have been diagnosed with:

• cerebral palsy (paralysis cerebralis infantium)

• muscular dystrophies

• paralysis

• spina bifida

• myelomeningocele

• spinal injury

• traumatic brain injury

• strokes

• other

medical conditions

with paresis, paralysis

locomotory disabilities

Summary of Contents for Baffin MODI BUGGY




































Search results

Summary of Contents for Baffin MODI BUGGY

Reviews:

Related manuals for Baffin MODI BUGGY

Brands by name

Popular brands

LIW Baffin MODI BUGGY, User Manual

Search results

Summary of Contents for Baffin MODI BUGGY

Reviews:

Related manuals for Baffin MODI BUGGY

Brands by name

Popular brands