LIW Baffin MODI BUGGY User Manual Download Page 33

Page: 33 / 35

Modi Buggy

™

Edition 7

p. 32

10. Warranty/Service

Should you notice any faults or defects, stop using the buggy immediately and contact

your dealer or

the

manufacturer. Defective unit must be

kept safe to prevent

any further damage

Never attempt to repair the product

yourself

Do not replace original parts with the ones

coming from a source other than the manufacturer recommends.

you

decide

to dis

continue using the product

, please

dispos

e of it

in accordance with the

environmental regulations.

The

manufacture's estimated

life

span

of the product is five years.

ost warranty service

is available on request. Please contact:

Baffin Technology Systems

[email protected]

Current contact details are available on our website: www.baffin.co.uk

Warranty terms are specified in the warranty card, which is an integral part of this statement.

The warranty card is available on the last page of this document.

11. Identification plate

Summary of Contents for Baffin MODI BUGGY




































Search results

Summary of Contents for Baffin MODI BUGGY

Reviews:

Related manuals for Baffin MODI BUGGY

Brands by name

Popular brands

LIW Baffin MODI BUGGY, User Manual

Search results

Summary of Contents for Baffin MODI BUGGY

Reviews:

Related manuals for Baffin MODI BUGGY

Brands by name

Popular brands