09
Technical Specifications
#
NOTE -
1. Use a Pre filter cartridge if water contains more than 10 NTU turbidity.
2. Input Raw Water temperature should be between 10°C to 45°C.
3. Total Dissolved Solids in input raw water should not exceed 1500 ppm.
4. Raw Water should be free from oil & grease.
5. Permissible Iron content in Input Raw water is 0.3 mg/L (max).
6. Total Hardness in Input Raw Water should not exceed 600 mg/L (max).
* If input water pressure is below 0.3 kg/Sq.cm, use of Booster Pump attachment is recommended to increase input water pressure and proper functioning of the unit. Flow rate depends on the input water
pressure and condition of the filters.
** If input water pressure is above 3.0 kg/Sq.cm, use of pressure reducing valve is recommended for Leak proof and smooth functioning of the unit.
#Manufacturer reserves the right to change/replace/upgrade any part of component in pursuit of providing continuous improvement in the quality of the products to its esteemed customers.
RO + UF
Upto 12 litres/hour
Upto 75 litres/day
7 Litres (approx)
75 GPD (Gallons Per Day)
Anti Scalant Cartridge, Sediment Filter, Pre Activated Carbon Filter
RO Membrane, Ultra Filtration (UF) Cartridge,
Silver Impregnated Post Carbon Cartridge
0.3 Kg/Sq.cm*
3 Kg/Sq.cm**
140-300 V AC / 50 Hz
24 V DC
Purification Technology
Purification Capacity
Max. Duty Cycle
Storage Tank Capacity
RO Membrane
Purification Cartridges
Min. Inlet Pressure
Max. Inlet Pressure
Input Voltage
Operating Voltage