Livox Hub
User Manual
©
2019 Livox Tech. All Rights Reserved.
5
5. Livox LiDAR Port × 7
A JAE MX34012NF1 type connector port
used to connect to Livox LiDAR sensor units.
Only compatible with JAE MX34012SF1 type
connectors.
6. Livox LiDAR Port × 2
A JAE MX34012NF1 type connector port
used to connect to Livox LiDAR sensor units.
Only compatible with JAE MX34012SF1 type
connectors.
7. Gigabit Ethernet Port
A RJ45 type Ethernet port used to connect to
Ethernet cables.
8. GPS Sync Port
A JAE MX34005NF1 type port used to connect
the designated GPS sync cable when GPS
synchronization is required. Only compatible
with JAE MX34005SF1 type connectors.
9. Power Port
A MOLEX 76825-0004 type port that connects
to an external power source. Only compatible
with MOLEX 171692-0104 type connectors.
* To view the ports on Livox Hub, unscrew and remove the port covers.
Connectors
Livox LiDAR Port
There are nine Livox LiDAR ports available on Livox Hub, and those nine Livox LiDAR ports have the
same functionality. Below is more information on the Livox LiDAR ports.
Figure 2.1.1 Livox Hub LiDAR port
Pin Signal
Type
Description
1
Power+
Power
DC Output 12.8 V
5 A Over Current Protect
7
2
Ground
Power
Ground
8
11
3
Ethe
Output
100BASE-TX, TX+
4
Ethernet_TX-
Output
100BASE-TX, TX-
5
PortDet
Input
Port Detection Signal
6
Sync+
Input
RS485_A, Pulse Per Second
9
Ethe
Input
100BASE-RX, RX+
10 Ethernet_RX-
Input
100BASE-RX, RX-
12 Sync-
Input
RS485_B, Pulse Per Second
Table 2.1.1 Livox Hub LiDAR port description
3
4
7
8
9
10
5
6
2
11
12
1
