Instruction Manual
3
INSTRUCTION OF USE
SETTING THE TIME
Press MODE button for 2 seconds to enter the time setting mode.
The hour digits start blinking and can be set by pressing UP or DOWN. Press MODE again to set the minute
digits by pressing UP or DOWN.
SETTING THE ALARM
Press MODE to display the alarm and press for 2 seconds to enter the alarm setting mode. The hour digits
start blinking and can be set by pressing UP or DOWN. Press MODE again to set the minute digits by
pressing UP or DOWN.
To activate the snooze function press MODE when the alarm is ringing. The ‘AL’ icon will flash until the next
alarm sets off.
To turn the alarm off press DOWN.
SNOOZE INTERVAL SETTING
The default snooze interval time is 5 minutes. To change the snooze interval enter the alarm setting mode
and press MODE 3 times. The ‘05’ digit starts blinking and you can set the interval time by pressing UP or
DOWN.
NIGHT MODE FUNCTION
Night mode function allows to automatically lower the brightness level during night time. The default night
mode is from 6PM to 6AM.
Press MODE 2 times to display “ON”. Press and hold MODE to enter night mode setting.
The hour digits start blinking and can be set by pressing UP or DOWN. Press MODE again to set the minute
digits. Press MODE to set the time when the night mode is over.
BRIGHTNESS LEVEL ADJUSTMENT
You can choose between three brightness levels. The default setting is medium level.
To adjust the brightness press UP.
POWER SUPPLY
•
1 x button cell (CR2032)
•
DC input 5V/500mA-1000mA
•
USB
Note that the button cell allows only to keep the time in memory in case there is no power supply. The
display and setting functions are not active under this condition.
