Instruction Manual
7
Off mode power consumption
P
off
0,23
W
Fan sound power level
L
WA
66,14 dB(A)
Maximum air velocity
c
3,70
meters/sec
Seasonal electricity consumption
Q
17,07 kWh/a
Meansurement standard for service value
IEC 60879:1986
(corr.1992)
Contact details for obtaining more information DELTA
BP61071
67452 Mundolsheim – France
ASSEMBLING
Before first use, be sure to remove all packaging. Do not leave packaging such as plastic bags, polystyrene,
cords within reach of children to avoid any risk of accidents.
Warning:
the fan can be used only if completely and correctly assembled, i.e. with base, support and
protective grill. If in doubt, have it checked by professionally qualified personnel or ask them to assemble
it.
Note:
before assembling the fan, ensure that it is not plugged into the mains. Refer to the diagrams for
assembly.
1.
Install the five castors (21) on the base (20).
2.
Install the body (17) into the base (20), and use the base lock nut (22) to screw on the base tightly.
3.
Connect power connection line (15), and put it into the main body (17), and tight up by holder fixed
screw (16).
4.
Install the back grill (7), and tight up by grill lock nut (6) on the motor cover (12)
5.
Install the blades (5) on to the motor shaft (8), and anticlockwise by blade lock nut (4).
Installation
- Be sure to remove all packaging material from inside
the appliance.
- Ensure that the fan is switched off from the supply mains before start any installation or assembly
operation.
- The appliance should be used with its base fitted.
- Install misting board (1) on the front grill (2) and screw up by misting board lock screws (3).
- Put the front grill (2) and back grill (7) together, and screw to fasten by grill ring, and tight up by grill lock
nut (11).
