Instruction Manual
10
over a range of 75º
- To activate this function, push the OSC button. The yellow light of OSC on .
- Press it again to stop oscillation, yellow light of Osc off.
Ionic function:
this feature uses negative ions to remove some harmful particles from the air in your home. It can
also destroy bad smells.
- This function can be used separately, or worked together with the fan.
- Push the ion button, green light of Ion function on,
- Push it again to stop working, the green light of Ion function off.
Mosquito repellent function
- Mosquito repellent function can be used separately, or worked together
with the fan.
- Put the mosquito repellent tablet (not included with the product) into its
hole on the body rear shell.
- When the unit is turned on in the standby or ventilation mode, press the Mosquito Repellent button and a
buzzer will sound and a light and room temperature will be displayed on the control panel.
- Push it again on mosquito button to stop working.
Note:
- Turn off the power when you replacing the mosquito repellent tablet, wait for 10 minutes then replacement
in order to avoid burns or electric shock.
- Please keep the mosquito repellent tablet out of reach children and vulnerable people.
- Do put the mosquito repellent tablet in contact with eyes or mouth. If put in mouth by accident, wash
mouth and seek medical care immediately.
Timer function:
-
When the unit is in operation press the Timer button, a beep sound.
- Each pressure adds 1h of operation from 1h to 12h and the selection is displayed on the control screen.
- During the timer setting the selected time and room temperature will be displayed on the control panel
every 5 seconds alternately. The number of hours displayed on the screen will decrease as you go.
- After the selected time is complete, the unit will stop automatically.
-
Note:
While the mist function work normally, the indicator light on the body shell is blue, while the water
is lacking, the indicator light is red.
plus or minus pole.
