User manual
6
6.
Firstly, pour the espresso coffee into the coffee cup, and then the foamed milk into the coffee cup.
By now the cappuccino coffee is done.
Warning: the steam nozzle shall not be placed on the surface of the milk
so as not to be scalded as it will
cause milk splash
To prepare more than one cappuccino, first make all the coffees then at the end prepare the frothed
milk for all the cappuccinos.
To make coffee again after the milk has been frothed , cool down the boiler first or the coffee will be
burnt.
It is recommended that after the production of steam, the coffee machine can be used again only after
cooling it for at least 5 minutes.
After producing the milk foam, unscrew the steam knob to OFF position and screw it back to make the
coffee machine release steam for a few seconds. Switch the steam knob again to OFF, clean the steam
mouth in case the steam mouth is blocked by the remaining milk.
ESE pod serving :
1.
Fill the filter screen with the ESE pod.
2.
Put the filter screen into the funnel; buckle it into the coffee machine from the "insert" position;
and then turn it right to the "locked" position.
3.
Place the coffee cup to be used under the filter holder, press single cup button, LED light of this
button will be on and others will be off accordingly at this time, machine starts to make single cup
coffee. When press double cup button, LED light of this button will be on and others will be off
accordingly. At this time, machine starts to make double cup coffee. After making coffee, the
buzzer will ring three sounds.
Custom setting
•
Connected to power supply, press single or double cup button for 3s under constant temperature
and standby mode, LED of the pressed button will flash, let go of the button and then start to make
coffee, LED indicator light of single and double cup are flashing, you can press any button to end it
when brewing coffee. The setting time is custom time.
•
If the coffee making time is set to be less than 15s, then the default setting of machine is 15s.if you
don’t press any button when brewing coffee, machine will stop automatically after 75s, then the
default setting of machine is 75s
.
Note:
Restore factory defaults
Press both single and double cup buttons for 3s under constant temperature and standby mode, LED lights
flash for 3 times, then finish machine restore factory defaults.
CLEANING AND STORAGE
•
Before cleaning, turn the machine off, unplug it from the power socket and allow it to cool down.
•
Do not use solvents or detergents when cleaning the coffee maker. Use a soft wet cloth.
•
Remove the drip-tray, empty and wash it regularly.
•
Clean the tank regularly.