User manual
4
USE OF THE APPLIANCE
Before first use:
Clean all the removable parts.
Please clean it with clean water for 2-3 times according to coffee-making process: coffee powder is not
necessary for cleaning the coffee machine.
Filling water tank
Open the water tank lid and the take out the tank by pulling upwards.
Fill the tank with fresh clean water taking care not to exceed the MAX level.
Replace the tank, pressing lightly to open the valve located on the bottom of the tank.
IMPORTANT: It is normal for there to be water in the space under the tank. This is should therefore be
dried regularly with a clean sponge.
Preheating the coffee machine
1.
Open the tank cover and add appropriate amount of water into the tank. Note that the water level
cannot exceed the MAX scale, nor be lower than MIN scale.
Warning: in the case of no water in the tank, the use of the machine will affect the service life of the
pump. Please add water in time when the water level is below MIN scale.
2.
Connected to the power supply, rotate steam knob aim to OFF marks in top cover to shut off the
steam, press on-off switch, single cup and double cup indicator light is flashing and buzzer rang
shortly.
If no heating, buttons will be not available in these state. After 30S of warning, the machine will
enter into standby mode automatically and all indicator lights will be off. The Machine turns off
automatically after 30 mins without any operation.
3.
Put the filter screen into the filter; buckle it into the coffee machine from the "insert" position and
turn it right to the "locked" position.