29
Procedures of connecting the PV Strings
Step 1
Remove an appropriate length of the insulation layer from the positive and negative
power cables using a wire stripper, as shown in below Figure.
Positive metal connector
Figure 5.10 Removing insulation layer for DC cable (unit: mm)
Negative metal connector
Step 2
Insert the exposed areas of the positive and negative power cables into the metal
terminals of the positive and negative connectors respectively and crimp them using a crimping
tool, as shown in Figure 5.11.
Figure 5.11 Crimping a metal connector
Step 3
Insert the crimped positive and negative power cables into the corresponding positive
and negative connectors until a "click" sound is heard, as shown in Figure 5.12.
Figure 5.12 Connecting positive and negative connectors
P
C
Summary of Contents for GT1-3K-S
Page 1: ...Ver 00 GT1 3K 6K...
Page 46: ......
