manualshive.com logo in svg

Living Spaces MAS90, Quick Start Manual

Share
Download
Living Spaces MAS90 Quick Start Manual Download Page 4

 

Installation of individual slats for use with

 

Slat Roll 

(Slat roll sold separately)

See your retailer for purchase of Slat Roll

 

 

SCREW

SCREW

SCREW

SCREW

SCREW

SCREW

SCREW

SCREW

SCREW

SCREW

INDIVIDUAL

      SLATS INDIVIDUAL

      SLATS INDIVIDUAL

      SLATS

Installation of individual slats for use with 

Bunkie Board 

(Bunkie Board 

sold

 separately)

 

See your retailer for purchase of Bunkie 

Board

SCREWSSCREWSSCREWSSCREWSSCREWSSCREWS

INDIVIDUAL

      SLATS INDIVIDUAL

      SLATS INDIVIDUAL

      SLATS

When used with a slat roll, the three 

individual slats should be placed evenly in the gaps 

and underneath the strapping before fastening.

Individual Slat

Individual Slat

Individual Slat

     

Summary of Contents for MAS90

Page 1: ...NC SCREWS 4 2 1 4 L BRACKET 16 8 X 3 4 PHIL PAN SMS ZINC SCREWS 7030 00452 KIT ASSEMBLY 1 PERSON AND 45 MINUTES TOOLS 1 4mm Allen Wrench INCLUDED 2 4mm Allen Drill Bit Be sure to FULLY SEAT the bit into bolt head before turning 3 Phillips Screwdriver We recommend using a power driver with the drill bits if available BE SURE THE LAG BOLTS ARE STARTED INTO THE HOLES ON THE FRAME RAILS DURING ASSEMBL...

Page 2: ...TRUCTIONS Make sure you have all parts before beginning assembly If you need a part contact the dealer where you purchased your bed 1 Attach two mattress rails E to headboard footboard assemblies D with 8 lag bolts and 8 washers and tighten 2 Spread Slat roll out across bed frame from end to end Place wood screws in 4 outside corners with slat pushed tightly up against the bed end Place 3 loose sl...

Page 3: ...ights 6 Attach on 2x4 bracket inside each end centered on the headboard ends 7 Attach 2 L brackets to the top of the underdresser corner blocks at each end and to the back of the front side rail cleat as shown in Detail C to the right above Use two of the 2 brackets to attach the back bottom ends of the underdresser to the bottom rail of each end panel as shown in Detail D to the left above 7030 0...

Page 4: ...IVIDUAL SLATS Installation of individual slats for use with Bunkie Board Bunkie Board sold separately See your retailer for purchase of Bunkie Board SCREWS SCREWS SCREWS SCREWS SCREWS SCREWS INDIVIDUAL SLATS INDIVIDUAL SLATS INDIVIDUAL SLATS When used with a slat roll the three individual slats should be placed evenly in the gaps and underneath the strapping before fastening Individual Slat Indivi...

Reviews:

No comments

Brands by name

Popular brands

Load more brands