SUMMIT ROOMSAVER
HEADBOARD BRACKET PLACEMENT
5)
Attach one ½” x 2” straight bracket at each end of the headboard spanning the joint between the top rail
of the ends (D) and the bottom edge of the headboard uprights.
6)
Attach on 2x4’ bracket inside each end centered on the headboard ends
7)
Attach 2 ¼” “L” brackets to the top of the underdresser corner blocks at each end and to the back
of the front side rail cleat as shown in Detail C to the right above. Use two of the 2 ¼’ brackets to
attach the back, bottom ends of the underdresser to the bottom rail of each end panel as shown in
Detail D to the left above.
7030-00452
