To Light
1. Make sure the control knob is in the "off" position.
2. Remove door and slowly open the valve on the propane gas tank by turning the knob
counterclockwise.
3. Replace the door on the body.
4. Push and hold in the electronic igniter to create sparks within the electrode, continue to
hold.
5. Push in the control knob and turn to the "low" position. Keep holding down the control knob
to allow gas to flow for 45 seconds.
6. If ignition doesn't occur within a few seconds release the control knob and rotate to the
"OFF" position. Wait for 5 minutes for gas to clear and then repeat the above lighting
instructions.
7. Once the fire product is lit, the flame intensity may be controlled by turning the control knob
between the "low" and "high" positions.
To Extinguish
1. Turn control knob clockwise to the "low" position; let the knob pop up and continue turning
the control knob to the "off" position.
2. Close the cylinder valve on the propane gas tank if you don't intend to use it for a long time.
Page 9
MOD CONCRETE FIREPIT
LS SKU# 282562
MODEL # DE-GCL-FUO-4824XL
