4. Installing & Replacing the Battery
5. Getting Started
●
Plug one end of the included AC adapter into a standard 110-240V AC electrical outlet
and the other end into the DC in of the frame.
●
Remove the protective film covering the LCD.
●
Remove the plastic battery insulator from the battery compartment and make sure the
remote control has a battery inside. Please refer to “Installing & Replacing Battery” if you
need a new battery.
●
Power on the unit by pressing the Power button on the remote control.
6. Operating Instruction
6
Installing & Replacing the Battery
If you need a new battery, please refer to the following.
Place the upside of the remote control down, press down on the ridged area of the battery
cover and pull towards you to remove the tray. Place one CR2025 lithium button-cell battery
on the tray with the po”side facing you. Reinsert the tray.
After turning on the unit, it will show the
startup picture, than pictures will
automatically play from the built-in
memory when there is no card insert.
If there is a card or USB device, it will
slideshow pictures from the card or
USB.
