Troubleshooting
If the following problems occur to the dehumidifier, the following solutions can be adopted.
Symptoms
Possible
reasons
Solutions
The dehumidifier does not
run
Does power plug fall ?
Insert power plug into socket.
Is the water tank full of water ? (the
water tank is full of water or is placed at
incorrect position)
Drain water from the water tank,
and then install the water tank
again.
The ambient temperature is lower than
5℃or higher than 32℃
Normal phenomenon
The dehumidification
function is not effective
Is the room temperature or humidity
too low ?
In dry season the
dehumidification ability will
reduce.
Are the air outlet and inlet blocked ?
Clean up the objects blocking
the air outlet and inlet.
Air is not blown out
Is the air strainer blocked ?
Clean the air strainer according to
the above method.
Noise is abnormal during
operation
Is the dehumidifier placed improperly so
that it is inclined or unstable ?
Please place the dehumidifier in
smooth place.
Is the air strainer blocked ?
Clean the air strainer according
to the above method.
There is “tittering” sound
The flowing sound of refrigerant,
which is a normal phenomenon.
Water leaks
Connection of drainage pipe becomes
loose
Fasten drainage pipe.
Drainage system is blocked
Remove obstacles and straighten
out water pipe.
Frosting occurs
The ambient temperature is low, and it
is in the state waiting for defrost.
It is a normal phenomenon, and
the dehumidifier has the
automatic defrosting function.
Display code
Instrustion
FL
The water tank is full
E1
The coil sensor detects anomaly
E2
The room temperature sensor detects
anomaly
P1
The unit is in the defrosting state, normal
CL
The unit is in the internal drying state,normal
LC
Child lock funtcion starts
1
2
