AFTER SALES SUPPORT
[email protected] or 0800 100 858
5
5
The Cam and Connecting Bolt system is used to put your unit together. Below is an explanation of how this
system works.
The Drawer Slide components shown
above
are to be attached to the
cabinet
. They have letters
CL
or
CR
stamped on them to indicate left hand or right-hand components. You will need these for steps 1 and 2.
Your pack will contain two sets of Metal Drawer Slides. These are bundled together with adhesive
tape. The set comprises of 4 components. Undo the tape on one set at a time and separate the
parts.
LEFT HAND PART (
DL
) RIGHT HAND PART (
DR
)
T
he Drawer Slide components shown
above
are attached to the
drawer
. They have the letters
DL
or
DR
stamped on them to indicate left hand or right-hand components. Put these parts aside for
attaching to the drawer later.
Cam Installation & Operation Guide
Drawer Slides Guide
Use these holes
