AFTER SALES SUPPORT
[email protected] or 0800 100 858
12
•
Fit the
Front Rail
over the Connecting Bolt and tighten the cams as shown on page 5, ensure you
don’t over tighten them, or this may split the side of the rail.
Ensure the finished side of the Rail is
facing forward so the cams can’t be seen once the cabinet is completed.
•
Fit the
Base Shelf
over the Connecting Bolt at the bottom of the end and tighten that cams as show
on page 5. Ensure the finished edge is face the front of the end as shown below.
STEP 7: Attach Rails to LH End
Front Edge
Base Shelf
LH End
Front Rail
