SLICING/CHIPPING/SHREDDING
1.
Firstly, see
Placement of chopping jar
on
page 6
2.
Fit the
shredding blade
or
slicing blade
or
chipping blade
into the
disk stand
,
place them in the bowl.
NOTE
: For assembling, first push in the no block side, then push in the other side. For disassembling the
blade from the disk stand, first push out one side with no block, then push out the other side.
3.
Place the
lid
onto the jar (see
Placement of lid
instruction on
page 7
)
4.
Turn the speed selector to 1 or 2 setting to start.
Note:
the shredding/slicing/chipping disks can slice thickly-potatoes, onions,
thinly-cucumbers, boot root, apples, and carrots…
1.
Use the food pusher to feed food into the feeding funnel. The food shall be cut
into proper size to suitable for the feeding funnel. You can slice/chip up to
1000g of food.
2.
Minimum 2 minutes rest period
must be maintained
after one
operation
cycle.
At least 30 minutes rest period
must be maintained to let the appliance
cool down
after three
operation cycles.
3.
Turn the speed selector to “0” position and unplug unit after processing.
Remove the blade ass’y. Unlock jar by turning it in anti-clockwise away from
its base, and lift it off. Empty the processed food.
CAUTION
: The blade is extremely sharp, handle with care.
CLEANING
1.
Disconnect the power supply before cleaning.
2.
Empty the chopping jar and remove the disk stand from the bowl, then remove the
shredding/slicing/chipping blade from the disk stand, the pusher from the lid, the lid from the bowl, then
immerse the lid, pusher, chopping jar, disk stand and the shredding/slicing/chipping blade in water and
clean them with a soft brush. Extreme caution must be taken when handling blade as they are very sharp.
Note:
For disassembling the disks from the disk stand, first push out one side with no block, then push out
the other side. For assembling, first push in the no block side, then push in the other side.
3.
Wipe the outside of base with cloth.
Never immerse the motor base in water as electric shock is
possible to occur
. Then dry thoroughly. Ensure the interlock area is free of food particles
Note
: Some food may discolor the disk stand. This is normal and will not harm the plastic or effect the
flavor of food. Rub with cloth dipped with vegetable oil to remove discoloration.
0800 422 274
NZ
