9
0800 422 274
NZ
• Position the dishwasher on a level and sturdy floor.
• If the floor is uneven, adjust the adjustable feet until
it reaches a horizontal position; just screw the feet
in or out a little (Fig. 1).
• The appliance should not be inclined more than 2
°
.
• Correctly levelled, the appliance will be more stable
and much less likely to move or cause vibrations
and noise during operation.
Fig. 1
Fig. 2
Fig. 3
Installation (Cont.)
LEVELLING THE APPLIANCE
FREESTANDING INSTALLATION
Between existing cabinets
• The height of the dishwasher, 845mm, has been
designed in order to allow the machine to be fitted
between existing cabinets of the same height in
modern fitted kitchens (Fig. 2). The feet can be
adjusted so that the correct height is reached.
• The laminated top of the machine does not require
any particular care.
Underneath an existing worktop
• In most modern fitted kitchens there is only
one single worktop under which cabinets and
electrical appliances are fitted. If you want to fit
this dishwasher under an existing worktop, you
need to remove the worktop of the dishwasher by
unscrewing the screws under the rear edge of the
top (Fig. 3: a).
IMPORTANT!
Keep the screws! After removing the
worktop you will have to screw them back under the
rear edge of the top (Fig. 3: b).
• The height of the dishwasher will then be reduced
to 815mm (as per ISO regulations), which means it
should fit perfectly under your kitchen worktop.
