21
MOOD LIGHT BUTTON
Press “MOOD LIGHT” button to choose one of the 14 mood light colours or to turn off the
mood light.
NOTE:
The controls on appliance will lose the memory for all function settings when the switch is
set to the Off Position. When the remote runs out of power or when you change the batteries, only
the flame function will lose memory and will not affect the timer settings, however, the clock may
need adjusting.
3.2
Operating by Remote Handset
•
Make sure the batteries are installed properly in the remote control.
•
The effective range of the remote control is up to 4 meters or 13 feet.
NOTE:
This is a thermostatic remote control. The remote should be in the same room as fireplace and
placed on a flat surface. It must be placed away from the heater so the hot air will not blow on it and
affect thermostatic reading.
ICON
TITLE
FUNCTION
Power
ON/OFF
Press this button to turn on/off the unit. When you want to turn
the unit off while the heater is on, a 10 second count down will
appear on the display.
Flame
Press this button to select one of the three flame colours or to turn
the off the flames.
Temperature Press this button to set the temperature. Press at least 3 seconds
to change the temperature unit to °C or °F.
Low Heating Press this button to turn on/off 1000W heating
.
High Heating Press this button to tunr on/off 2000W heating .
Smart Heating Press this button to turn on the Smart Heating Mode .
Timer
Press to set the timer through 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, 7H,
8H, 9H and off.
Mood Light
Press to select mood light through 14 settings and off.
Fuel Bed
Not available for this model.
