Before cleaning the fan, please read the following:
• Always unplug the fan and disconnect from power before cleaning.
• Use only a soft, damp cloth to gently wipe the outer surfaces of the fan.
• Do not immerse the fan in water or other liquid and never allow water to drip on
the motor housing.
• Do not use gasoline, paint thinner, or any other corrosive cleaning solutions to
clean the fan.
• To clean between the grills, we recommend using a pipe cleaner, flexible dust
wand, vacuum cleaner or compressed air to gently remove dust.
• If the fan will not be in use for an extended period of time, you may leave the fan
assembled. Cover to protect from dust. Store in a cool, dry place.
Maintenance
Cleaning the Fan & Replacing the Battery
Cleaning the Fan:
Before cleaning the filter, please read the
following:
1. Turn off and unplug fan from power source.
2. Push up on prongs to release back grill.
3. Remove filter from grill.
4. Vacuum filter with vacuum’s brush
attachment. Hold down pre-filter to prevent
being sucked into vacuum. DO NOT use water,
any liquid or detergent to clean the pre-filter.
5. If needed, clean grill with a soft, damp cloth.
6. Align filter in grill and ensure filter is laying
flat.
7. Insert top tabs of grill into fan.
8. Push grill towards fan until the bottom
prongs securely snap into place.
Although filter is meant to be permanent, it may lose efficiency over time depend-
ing on air quality and environmental factors. If filter is no longer easily cleanable,
replacements are available at www.livepureshop.com.
Cleaning the Filter:
Filter Ordering:
7
Grill
Pre-Filter
Fan
Figure 8
Model #
Filter Part #
Type
Replacement Filter,
2 Pack
LP-PF1900-FAP
LP1
7
00FAP-G
LP1
7
00FAP-W
LP1
7
00FAP-B