background image

9

4.  Set the volume level by pressing 

B

 to switch between 0 (mute), 1 (low volume), and 2 (high 

  volume). The small number on the left side will change accordingly.

5.  Switch between the two alarm types from this menu by pressing the 

C

 button and holding it 

  for three (3) seconds. The number on the right side of the menu will switch between 1 (slow 
  beeps) and 2 (rapid beeps).

4

0

2 2

4

1

2 2

4

2

2 2

4

2

2

4

2

6.  When you are finished in this menu, press 

A

 at any time to return to Clock Mode, or wait for 

  15 seconds and it will return to Clock Mode on its own.

Setting Medication Times

1. Press the 

A

 button to enter the Alarm Menu. A clock icon will appear 

  in the bottom left corner, with a number next to it. This number 
  indicates which alarm you are setting. You do not have to set all six 
  alarms if you do not need medication dispensed six times a day.
2. Press the 

B

 button to adjust the hour of the alarm. To move through 

  the hours faster, you can press and hold the 

button.

3. Press the 

C

 button to adjust the minutes of the alarm. To move 

  through the minutes faster, you can press and 
 hold 

the 

C

 button.

4.  Make sure the AM/PM setting is correct, if you 
  are not using 24-hour time.
5.  To confirm and finalize the alarm, press the

 

  A

 button to move to the next alarm.

6.  Repeat steps 2-5 for each alarm you wish to set. 
  You can set a maximum of six alarms.

Summary of Contents for LVFRAPD5













Reviews: