8
Locking and Unlocking the Cover
The cover lock helps to prevent accidental spills and prevents unwanted access to your
medication dispenser. This can also help with patients who are confused and may try to take
medication at the wrong times.
1. Take the metal key and line it up with the notches on
the cover lock (located on the bottom of the dispenser
as
shown).
2. You will see a vertical line at the top, and a horizontal
line with the letter L on the left side. Press down on
the cover latch and turn the key toward the L
(counterclockwise) to lock the cover in place.
3. Turn the key toward the vertical line (clockwise) to
unlock the cover.
4. Lift the cover open using the cover latch.
Setting the Time
1. Press and hold the
A
button for approximately three (3) seconds,
until
the
:
stops flashing.
2. Press the
B
button to adjust the hours and press the
C
button to
adjust the minutes, until the time is correct.
3. When finished, press the
A
button again to return to Clock Mode.
Setting the Volume, Alarm Type, and 12-Hour/24-Hour Time
1. While on Clock Mode (not setting any alarms), press the
C
button once to enter the time and
volume
menu.
2. You will see a number in the bottom left corner that says 0, 1, or 2; either a
12 or 24 in the middle; and either a 1 or a 2 on the right side.
3. Press
C
to switch between 12/24 hour modes. The middle number will change from 12 to 24.
2
4
2
2
4
0
2 2
