- 3 -
Placement
For best results, place your Solar lamp in a
location where sunlight shines directly onto the
collector panel
4
. Direct sunlight of at least 8
hours is ideal to ensure that the battery is fully
charged. The location must be free from shadow
and shade. Make sure that the collector panel
4
is not subjected to light sources other than
sunlight. Otherwise, the lamp will not be swit-
ched on at twilight.
Initial use
³
Remove the collector panel
4
together with
the reflector
5
out of the housing
6
.
Turn the reflector
5
somewhat against the col-
lector panel
4
, until it releases itself from the re-
straint.
³
Remove the reflector
5
from the collector pa-
nel
4
.
³
Place the function switch
1
, on the bottom of
the collector panel
4
, at the ON position.
³
Place the reflector
5
and the collector panel
4
back together again.
³
Replace the collector panel
4
, together with
the reflector
5
, back into the housing
6
.
³
Place the solar lamp at a suitable location.
Note:
The charging process will only start if the functi-
on switch
1
is in the ON position. It can take a
few days until the Solar Lamp has reached its
optimal performance efficiency.
After the battery is charged, the solar light turns
itself on automatically at dusk.
³
To switch the solar lamp off, place the functi-
on switch
1
, on the bottom of the collector
panel
4
, into the OFF position.
Changing the battery
Replace the battery when the illumination time,
despite a day-long charge period, diminishes af-
ter 2 hours of darkness.
³
Remove the collector panel
4
together with
the reflector
5
out of the housing
6
.
Turn the reflector
5
somewhat against the col-
lector panel
4
, until it releases itself from the re-
straint.
³
Remove the reflector
5
from the collector pa-
nel
4
.
³
Open the battery compartment
3
on the un-
derside of the collector panel
4
.
³
Remove the battery and replace it with a new
one of the same type. When inserting it, com-
ply with the polarities.
³
Close the battery compartment
3
and repla-
ce the reflector
5
and the collector panel
4
back together.
³
Replace the collector panel
4
, together with
the reflector
5
, back into the housing
6
.
Cleaning
Clean the collector panel
4
with a moist cloth.
Clean the housing
6
of the solar light with a
soft brush.
Attention!
• Do not use aggressive or chemical cleaning
agents. These could cause damage to the
appliance.
IB_63972_KH4246_LB3 23.02.2011 9:55 Uhr Seite 3
