9
GB
RISK OF INJURY!
Make sure
that when the lamp is removed
that the ground spikes are also
removed so they cannot pose
any risk (e.g. stumbling over them).
Before use
Note:
Remove all packaging materials from the
product.
Installation
Place the 3D rope light figure
1
on a stable
substrate.
For outdoor installation, if possible fix the 3D
rope light figure
1
in place with the ground
spikes
3
and the cable ties
5
.
Check the stability of the 3D rope light figure
1
.
For indoor installation, place the 3D rope light
figure
1
on an even surface and fix it with the
cable ties
5
if possible. Otherwise, the product
may not stand stable.
Use
Plug the mains plug
2
into the socket.
Please note that the product will still use some
energy even when the product has been switched
off if the mains plug
2
is still plugged in. To
switch the product off completely, unplug the
mains plug
2
from the socket.
Timer function
The timer button
4
has three functions:
1 x push of the button:
The product lights up continuously.
2 x push of the button:
The product lights up continuously for 6 hours
and then switches itself off for 18 hours. The
product will then switch on again for 6 hours at
the allocated time and then switch off for
18 hours.
Note:
The timer button
4
lights up when the
timer function has been activated.
3 x push of the button:
The product is switched off.
Cleaning and care
CAUTION! RISK OF ELECTRIC SHOCK!
First remove the mains plug
2
from the socket.
CAUTION! RISK OF ELECTRIC SHOCK!
For reasons of electrical safety the product must
never be cleaned with water or other liquids or
immersed in water.
Let the product cool before you clean it. Risk
of injury!
Do not use any solvents, petrol or similar items.
This would damage the product.
Only a dry, lint-free cloth should be used for
cleaning.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
