LIVARNO 354373 2010, Operation And Safety Notes

Page: 23 / 113

23 GB/IE
2
Now attach the paper
lantern
10
.
3
4
Carefully slide the holder
9
into the paper lantern
10
and
secure to the grommets
12
(see Fig. B).
Installing the
fairy lights
Push the ground spike
3
far
enough into the ground (lawn,
flower bed) so it is firmly posi-
tioned upright in the ground.
Make sure it is firmly positioned.
Do not use any force when as-
sembling or setting up the
product, e.g. hammer blows.
This will damage the product.
For optimal results, hang the
solar fairy lights in a location
where the solar cell is exposed
to sunlight for the longest pos-
sible amount of time.
Make sure the solar cell is not
impacted by other light sources,
e.g. yard- or street lighting, or
the light will not switch on at
twilight. In low light the light
will automatically switch on,
and automatically switch off
in normal ambient light.
Switching the fairy
lights on / off
Push the AUTO / OFF button
2
to switch the fairy lights on. The
fairy lights
11
will automati-
cally switch on or off at twilight.
Push the AUTO / OFF button
2
again to switch the fairy lights
11
off.
Replacing the
rechargeable
battery
Note:
For optimal performance,
the rechargeable battery should be
replaced every 12 months.
Remove the solar cell housing
1
from the cover
5
.
Press the AUTO / OFF button
2
to switch the fairy lights off.
Remove the fixing screws
7
using a small cross-tip screw-
driver. Then open the battery
cover on the solar cell housing
1
using a flat-head screw-
driver.
Replace the old battery with a
new one; be sure not to dam-
age the cables. Be sure to in-
sert the batteries in the correct
direction. This is indicated in the