14 GB/IE
Safety / Start-up / Maintenance and cleaning / Disposal
For your safety
Mount the light so that it is protected from
moisture and dirt.
Always be attentive! Always pay attention to
what you are doing and always proceed with
caution. Never mount or use the light if you are
having difficulty concentrating or do not feel well.
In order to disconnect the light completely from
the power supply, the mains plug must be
removed from the socket.
Start-up
Installing the light
Note:
Remove all packaging materials from the
product.
Only for 14122206L:
Position the lamp on a flat surface.
Plug the mains plug
5
into a socket that has
been professionally installed.
Switch the lamp on or off using the ON / OFF
switch
4
.
Only for 14152006L:
Position the lamp with the screw clamp
6
in the
desired location.
Then tighten the screw
7
. Ensure the screw
clamp
6
is securely fastened.
Plug the mains plug
5
into a socket that has
been professionally installed.
Switch the lamp on or off using the ON / OFF
in-line switch
8
.
Adjusting the reflector
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Note:
Only change the position of the reflector
1
if the lamp is turned off.
Allow the light to cool off completely.
Adjust the flexible lamp arm
2
to the desired
position.
Adjust the reflector
1
to the desired position.
Maintenance and cleaning
RISK OF ELECTRIC SHOCK!
First remove the mains plug
5
from the socket.
RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
Plug the mains plug
5
into the socket again.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Guarantee and service
